basket  £0

Items for Sale


Myford

More Info

Lathe Archive

Milling Machines

Private Adverts

Gallery/Resources

Subscribe

Keep up-to-date via e-mail!


myford lathe parts

Motor Platform [A1945_k1] Motor Platform [A1945_k1]
Motor Platform
Myford Part No. A1945
Comes with the Pivot Pin
Category: Used item
Application: Super 7...
£25.95
Motor Fastener Kit [MFK_k1] Motor Fastener Kit [MFK_k1]
low in stock! Sold
This is a set of fasteners used to secure an ML7 or Super 7 motor to the motor platform
Category: Used items
Application: ML7; Super 7; ML7-R...
£6.95
Pulley Lock Assembly [A2751_k1] Pulley Lock Assembly [A2751_k1]
Locking pin assembly used to prevent rotation of the headstock pulley on Super 7 lathes
Myford Part No: A2751
Condition: Excellent
Application: Supe...
£8.95
Headstock Screws [S7H/S_Screws] Headstock Screws [S7H/S_Screws]
low in stock! Sold
Set of 4 screws used to fasten a Super 7 headstock to the bed
These are Imperial B.S.F. screws (later lathes were metric)

Application: Super 7
Cate...
£4.50
Spring [A2806] Spring [A2806]
Spring used with standard tool clamp on all 7-Series, 10-Series and 254-Series lathes
Myford Part No: A2806
Application: Super 7; ML7-R; ML7; ML10; Speed ...
£2.95
Headstock Pulley [A1994_k2] Headstock Pulley [A1994_k2]
low in stock! Sold
Vee Cone Pulley Assembly - from a Mk2 lathe headstock but will also fit Mk1 lathes
Myford Part No. A1994
Condition: A bit worn and battered but still serv...
£9.95
24 Tooth Gear [ A3115_U1] 24 Tooth Gear [ A3115_U1]
low in stock! Sold
Myford Part No: A3115 (11285/24)
24 tooth gear which fits to the tumbler sleeve gear on lathes fitted with a quick change gearbox
Condition: 9/10
Appl...
£4.95
Backgear Eccentric [A1986/1_U] Backgear Eccentric [A1986/1_U]
Backgear Eccentric - later circlip version (early & later version are interchangeable as assemblies)
Myford Part No: A1986/1
Comes with the circlip t...
£14.95
Change Gear Stud Assembly [A1496K_k1] Change Gear Stud Assembly [A1496K_k1]
low in stock! Sold
Change Gear Stud Assembly
Myford part No's. A1496 Stud; A1500 Bush; A1501 Sleeve; A1499 Spacer; A1498 Washer; B.S.F Nut
Condition: New old stock - worksho...
£21.95
Headstock Rear Bearing Kit [HRBK_1] Headstock Rear Bearing Kit [HRBK_1]
Headstock spindle rear bearing kit
Myford Part No's: OEM bearings (2); A1991; A2055
Condition: 10/10
Category: Used items
Application: Super 7; ML7-...
£24.95
Pulley Lock Assembly [A2751_k2] Pulley Lock Assembly [A2751_k2]
Locking pin assembly used to prevent rotation of the headstock pulley on Super 7 lathes
Myford Part No: A2751
Condition: Excellent
Application: Supe...
£9.95
30T Gear [A1995_k1] 30T Gear [A1995_k1]
30T Gear - fits to the end of the headstock spindle
Myford Part No. A1995
Condition: Good used - 8/10 to 9/10
Application: Super 7; ML7R...
£8.95
Headstock Spindle [A1992_k1] Headstock Spindle [A1992_k1]
low in stock! Sold
Headstock Spinde with No. 2 MT bore
Myford Part No: A1992
Condition: Good used - 8/10 to 9/10. There is a small ding on the register - Picture 2
Appli...
£65
Cam & Lever Assembly [75_1332] Cam & Lever Assembly [75_1332]
Myford Part No: 75/1332
Cam & lever assembly with knob for earlier lathes with the aluminium alloy apron and 5/8" diameter leadscrew
Condition: Good u...
£12.95
Cam & Lever [A1837_1_4] Cam & Lever [A1837_1_4]
Myford Part No: A1837/1
Cam and lever for apron traverse
Colour: Grey
Condition: 9/10
Application: Super 7; ML7-R & ML7 Serial No.K111727 and o...
£12.95
End Plate Assembly [254EPA] End Plate Assembly [254EPA]
End plate assembly used on the compound slide to support the feedscrew
Myford Part No: 12089
Application: 254S; 254+
Category: New old stock...
£9.95
« previous 1 2 3 ... 5 6 7 ... 8 next »